 |
 |
Features:
- Temperature measurement range: -50 … 110°C
- Resolution Ratio: 0.1°C(-9.9-99.9); 1°C(other temperature range)
- Measurement accuracy: ±0.1°C
- Control accuracy: 0.1°C
- Return difference accuracy: 0.1°C
- Refresh rate: 0.5S
- High-temperature protection: 0-110°C
- Input voltage: DC 12V
- Measuring inputs: NTC(10K0.5%)Waterproof type sensor
- Output: 1 way 10A relay
- Environmental requirements: -10-60°C , humidity 20% -85%RH
- Size: 48mm(L), 29mm(W), 32mm(Depth)
- Hole size: 46x26.5mm
- Power consumption: Static current: ≤35MA,attract current: ≤65MA
- Power supply: 12V200MA
The upper number displays actual temperature, and the lower displays setting temperature.
When the actual temperature is higher than the setting temperature, the temperature controller brackovers, and conversely, it disconnects. Please act strictly according to the line connection and the positive and negative pole on user manual!
Wire Connection
Parameters
| Code | Explain | Setting range | Factory Setting |
|---|---|---|---|
| P0 | Heating/Cooling | H/C | C |
| P1 | Return Difference | 0.1-30 | 2.0 |
| P2 | Set Limit Max. | +110 | 110 |
| P3 | Set Limit to the Min. | -50 | -50 |
| P4 | Temperature Correction | -15~15 | 0 |
| P5 | Delay Start | 0-10 | 0 |
| P6 | High Temperature Alarm | -50~110 | OFF |
| P7 | °C/°F | CS/FH | CS |
| P8 | Factory Reset | ON-OFF | OFF |